External Release Agent for Braid Rubber Tube

Product Detail

Product Name: External Release Agent for shaped rubber tube with iron core

Product Type: L335/L350 

Product Feature:

1. milky white liquid, no flash point, the proportion is 0.99 kg/liter

2. It’s the polymer emulsion concentrate liquid, contains special lubricating and separation components, which has the characteristics of small surface tension, good film ductility, oxidation resistance, high temperature resistance, non-toxic, non flammable, good release durability and mold protection and so on

3. can give molded products a bright and clean surface, one time spray can be for several times mold release.

Scope of application:

It’s suitable for the mold release, isolation and lubrication of rubber hose, tyres, sundries, plywood, adhesive tape, EVA products and other heat-die compaction rubber products.

Using method:

1. Before the use, it’s diluted by deionized water with a 1:5-150 solution, the best ratio should be determined by the test.

2. Spraying or brushing method, the solution will be evenly sprayed in the hot mold cavity, then can start production.

3. The solution should be just prepared when use it, and can’t be rewinded back again.

4. Should keep the container sealed, can’t be mixed with other release agent or acidic and alkaline substances.

Packing, Storage and Transport:

1. 25kg or 200kg drum packed

2. Transport as the non-hazard goods, stored in the warehouse under 2-42?, and prevent freezing.

3. Properly use it can’t cause the damage, if need the full details, please ask us MSDS.

Shelf Life:

6 months




Product Name: External Release Agent for wrapped long rubber tube

Product Type: L335/L350

Product Feature:

1. Milk white liquid, the proportion is 0.99 kg/liter, no flash point. 

2. It’s polymer emulsion concentrate contains special lubricating and separation components, which has the characteristics of small surface tension, good film ductility, oxidation resistance, high temperature resistance, non-toxic, non flammable, good release durability, protect the molds and so on.

3. It can give molded products a bright and clean surface, one time spraying can be for repeated mold release several times.

Scope of application:

It’s suitable for the mold release, isolation and lubrication of rubber tires, sundries, pipe, plate and other hot mold pressing products.

Using method:

1. Before the use, it’s diluted by deionized water with a 1:5-150 solution, the best ratio should be determined by the test, in order to avoid excessive use.

2. Spraying or brushing method, the solution will be evenly sprayed in the hot mold cavity, then can start production.

3. The solution should be just prepared when use it, and can’t be rewinded back again.

4. Should keep the container sealed, can’t be mixed with other release agent or acidic and alkaline substances.

Packing, Storage and Transport:

1. 25kg or 200kg per drum

2. Transport as the non hazard goods, stored in the warehouse under 2-42?, and prevent freezing.

3. Properly use it can’t cause the damage, if need the full details, please ask us MSDS.

Shelf Life:

6 months

 

 

 

 

 

 

 




Should you are looking for quality external release agent for braid rubber tube, DEHUI must be your best choice, which is one of the leading suppliers. Top quality, good high temperature resistance and excellent performance are our characteristics. Please rest assured to buy our products for sale at competitive price.